Specifications

4-55
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Step 5 Click Submit.
To clear the fields and start over, click Reset.
To delete a VHO, first remove all groups from the VHO, then click Delete VHO.
Configuring VHO ISA Settings
The VHO ISA Setup page is used to configure the ISA settings for each video hub office (VHO).
Note The VHO ISA Setup page is available only on a Stream Manager when VVI and Content Storage are
enabled in an ISA environment. For more information, see the “Content Storage” section on page F-9
and the “Virtual Video Infrastructure” section on page F-7.
Note Before you can configure the ISA settings for a specific VHO, you must first add the VHOs through the
VHO Setup page. See the “Grouping Stream Groups into VHOs” section on page 4-54.
To configure, edit, or view the ISA settings for a VHO, do the following:
Step 1 Choose Configure > Array Level > VHO ISA Setup. The VHO ISA Setup page is displayed.
Step 2 From the Configured VHOs drop-down list, choose a VHO and click Select.
The Stream Groups that are members of this VHO are listed, as well as the number of Streamers in each
Stream Group.
Step 3 Enter the ISA settings as appropriate. See Table 4-22 for descriptions of the fields.
Table 4-21 Stream Group and Local Vault Group Options
Stream Group Option Description
No Change Do not make any changes to the VHO assignment.
VHO Name Add this group to this VHO.
None Remove this group from this VHO. Applicable only to groups
assigned to the selected VHO.
Don’t Change Do not assign this group to this VHO.