Specifications

4-54
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Grouping Stream Groups into VHOs
The VHO Setup page provides a way to group Stream Groups that have the same ISA settings. After the
VHO groups are created, you set the ISA settings for each VHO on the VHO ISA Settings page. See the
“Configuring VHO ISA Settings” section on page 4-55 for more information.
Note The VHO Setup page is available only on a Stream Manager when VVI and Content Storage are enabled
in an ISA environment. For more information, see the “Content Storage” section on page F-9 and the
“Virtual Video Infrastructure” section on page F-7.
To create VHOs, do the following:
Step 1 Choose Configure > Array Level > VHO Setup. The VHO Setup page is displayed (Figure 4-17).
Figure 4-17 VHO Setup Page
Step 2
From the drop-down list, choose Add New VHO and click Display.
To edit or view an existing VHO, choose the VHO from the drop-down list and click Display.
Step 3 In the New VHO Name field, enter the name for the VHO and click Submit.
The page refreshes and displays the unassigned Stream Groups and Local Vault Groups.
Note Local Vault Groups are only part of the Regionalization feature, not the Virtual Content Store
feature. For more information, see the “Configuring ISA Regionalization” section on page F-8.
Step 4 Add the groups to the VHO.
The unassigned groups are listed along with a drop down-list for each that offers the options described
in Table 4-21.