Specifications

4-52
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Table 4-20 Vault ISA Fields
Field Description
Vault ISA OpenStream Settings
Content Master
IP
This field defines the master IP address of the Content Service, which is the same for all Vault servers in an
array, and is used in the creation of the Interoperable Object References (IORs) for content objects.
The Vault server designated as the master Content Service (determined by a negotiating algorithm) sends
multicast heartbeat messages every second to the other Vaults in the array. If the heartbeat message has not
been received for more than five seconds, another Vault in the array takes over as master Content Service.
Content Master
Port
Port used by the master Content Service for controlling content. The Content Service Master Port is the same
for all Vaults in the array. The default is 3200.
Headend ID
1
This value is passed to the OpenStream system as part of the resource negotiation. The default is 0.0.0.0.
Config File
Name
1
Read-only field. Name of the file that stores the ISA configuration settings. The default is isa.cfg.
Web Service
Port
1
Port number used by web service processes listening on this server. The default is 8080.
FTP Out Port Port number used by the ISA 1.5 FTP Out feature.
Content Service
Content Store
Name
Name of the CDS Content Store object that is registered with the OpenStream system.
Content Store
Kind
Content store ID extension. The default is Factory.
Content
Factory ID
Name of the CDS Content Store Factory that is registered with the OpenStream system. The Content Store
Factory allows the creation of Content Store objects, and the Content Store objects act as factories for
Content objects.
Content
Factory Kind
Content store factory ID extension. The default is Factory.
Content No. of
Threads
Content store number of threads. The default is 32, which is also the recommended setting.
Pre-Encryption
Support
Enable or disable Motorola pre-encryption support. Pre-encryption is disabled by default. Pre-Encryption
Support must be enabled for Dual CAS. For more information, see the “Configuring MPEG Tuning” section
on page 4-29.
FTP Client
Port
Port used when the Vault receives a request from the OpenStream system to act as an FTP client and sends
an FTP GET command to the content provider acting as an FTP server. The default is port 21. This is a
control connection (data transfer process) and is known as an FTP push process.
FTP Server
Port
Port used when the Vault receives a request from the OpenStream system to act as an FTP server and receives
an FTP PUT command from the content provider acting as an FTP client. The default is port 4000. This is
a control connection (data transfer process) and is known as an FTP pull process.
FTP No. of
Attempts
Number of times the FTP client attempts to transfer the content file. The default is 1.
FTP Timeout Idle seconds allowed before an FTP download is disconnected. The default is 360000000.
CORBA Services
Name Service
IP
1
IP address of the CORBA Naming Service used by the OpenStream system.