Specifications

4-50
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Step 3 Click Submit to save the settings.
To clear the fields and start over, click Reset.
Step 4 Restart ISA/OpenStream services.
a. Choose Maintain > Services. The Services Restart page is displayed.
b. From the drop-down list, choose the IP address or nickname of the server and click Display.
c. Check the ISA/OpenStream Services check box and click Submit.
To clear the fields and start over, click Reset.
Configuring the Vault for BMS Connectivity
The Vault BMS page provides all the configurable parameters to configure your CDS to communicate
content services with the ISA/OpenStream Business Management System.
Note The Vault BMS page is only used in non-Content Storage systems.
The Vault ISA OpenStream settings are used to set the IP address and port of the master content server
on the CDS for communication with the OpenStream system. In addition, you can change the following:
• Web service port
• Headend ID used by OpenStream to communicate with the CDS
The Content Services settings are used to allow the OpenStream system and Vaults to communicate
information about content objects with each other, and to configure the FTP settings for the ingest of
content objects on to the Vault.
The CORBA Services consist of the Naming and Notification Services, which are used in the
OpenStream system. The Naming Service provides a standard service that clients can use to get object
references while maintaining location transparency. The Notification Service (also called the Event
Service) provides a framework for sending event messages by way of an event channel, which allows
other components to communicate with each other without knowing about each other.
The CORBA Event Channels are used to send event notifications over the Notification Service
framework about the state of the various components in the CDS to the OpenStream system.
To view the current Vault ISA settings, choose Configure > Array Level > Vault BMS. The ISA settings
currently configured for content services are displayed.
Session Gateways
Session
Gateway ID
[1-5]
Session Gateway ID is used by the backoffice Session Gateway service for registering with the Name Service.
The default is N2BBSession Gateway. The Session Gateway ID is required by the Resource Manager to
connect to the Session Gateway for checking the status of all the sessions on a regular basis.
1. Changes to this field affect the same field on the Vault ISA page.
Table 4-19 Streamer ISA Fields (continued)
Field Description