Specifications

4-48
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
TME/SCE From the TME/SCE drop-down list, select Enable for MystroMDN for Stream Control Events (SCE) or
Enable for OpenStream for Trick-Mode Events (TME).
Enabling TME requires that the stream service and LSCP or RTSP service deliver more CORBA events to the
Stream Event Channel. These extra events are triggered during the transitions from one content to another in
the play list of the stream. The CORBA event for stream destroy also carries the history of all transitions of
the stream.
Enabling SCE allows real-time splicing of MPEG-2 transport streams for digital program insertion (including
advertisement insertion) in live content as well as content recorded for the purpose of enabling time-shifted
on-demand services. Pre-roll, post-roll, and mid-roll placements of digital program insertion is supported. The
Vault detects the SCTE-35 cues and processes them at the time of ingest. The StreamExtChannel event channel
on the CORBA NotificationService is used to send ContentSignalingEvents that contain the SCTE-35 cue
information to the backoffice.
Note The SCTE-35 cue message cannot be greater than 400 bytes.
Note The configuration change for the ISA Stream Extensions feature requires that the ISA service is
restarted on both the master Vault and the Master Streamer. To identify the master Streamer and master
Vault, use the CDSM Monitor Services page to find the Streamer running the master stream service
and the Vault running the Content Store master. See the “Services Monitor” section on page 5-40 for
more information. To restart the ISA service, choose Maintain > Services, select the check box for
ISA, and click Submit.
CORBA Services
Name
Service IP
1
IP address of the CORBA Naming Service used by the OpenStream system.
Name
Service Port
1
Port of the Naming Service used by the OpenStream system. The default is 5000.
Notify
Service IP
1
IP address of the CORBA Notification Service used by the OpenStream system.
Notify
Service Port
1
Port of the Notification Service used by the OpenStream system. The default is 5005.
Notify
Service
Factory
1
Name used to locate the Notify Service through corbaloc protocol. The default name used by OpenStream is
DefaultEventChannelFactory.
CORBA Event Channels
Event
Channel ID
1
Simple name that identifies the root directory of the Event Channel where all event channels need to register.
The default is EventChannels.
Event
Channel
Kind
1
Directory extension of the Event Channel ID. The default is Context.
Stream
Channel ID
Simple name that identifies the Stream Event Channel where all events concerning stream objects are
published. The default is StreamChannel.
Stream
Channel
Kind
Event Channel Stream ID extension. The default is Factory.
Table 4-19 Streamer ISA Fields (continued)
Field Description