Specifications

4-42
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Step 3 In the IP Address field, enter the IP address of the remote server that is to receive syslog messages.
Step 4 In the Port filed, enter the port of the remote server that is to receive syslog messages.
Step 5 Click Submit.
To clear the fields and start over, click Reset.
To delete the remote server settings, click Delete.
Configuring System Level Error Repair
The VOD Error Repair settings can be configured on the System Level, Array Level, and the Server
Level. Settings configured at the Array Level take precedence over System Level settings, and settings
at the Server Level take precedence over Array Level or System Level settings.
Note VOD Error Repair is a licensed feature. VOD Error Repair requires the LSCP Client Protocol be set to
Cisco (RTSP) and the STB have the Cisco Visual Quality Experience Client (VQE-C) software running
on it. For more information, see the “VOD Error Repair” section on page F-6.
To configure error repair at the System Level, do the following:
Step 1 Choose Configure > System Level > Error Repair. The Error Repair page is displayed.
Step 2 Enter the Error Repair settings as appropriate. See Table 4-17 for descriptions of the fields.
Table 4-17 VOD Error Repair Fields
Field Description
Error Repair Mode
ER Enable To enable Error Repair, check the ER Enable check box.
RTP Encapsulation Enable To enable RTP encapsulation, check the RTP Encapsulation Enable
check box. TV CDS supports both UDP and RTP encapsulation. If
the RTP Encapsulation Enable check box is not checked, the CDS is
configured to only handle UDP encapsulation.
Repair Packets DSCP
DSCP of Repair Packets Sent DSCP value for the transmitted RTP and RTCP packets sent for error
repair. The range is from 0 to 63. The default is 0.
RTCP Report Exporting
Exporting Click the Enabled radio button to enable exporting of the RTCP
reports. The RTCP reports can be exported to a third-party analysis
application.
IP Address Enter the IP address or the domain name of the server hosting the
analysis application.
TCP Ports Enter the TCP port number that is used to receive the reports on the
server hosting the analysis application.