Specifications

4-40
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
All log entries have the following changes:
• Stream handle is represented in decimal format
• IP addresses are represented in dotted-decimal format
• Clear identification of where a stream is going rather than a MAC address
• Time is represented in UTC
• Global Object ID (GOID) is represented in hexadecimal
Stream Trace
Log messages currently in the streamevent.log file are converted to a structured message and assigned
the “stream trace” facility number. Other messages that record stream creation, routing, or playout are
converted to a structured message and assigned the “stream trace” facility number. This enhancement,
along with configuring syslog-ng to direct all “stream trace” facility messages to a single, centralized
log server, provides a coherent set of log messages that describe stream history.
Facility Information, and Associated Log File and Debug Flags
For information on each facility and associated log file and debug flags, use the loginfo tool The loginfo
tool can run on any CDS server, including the CDSM. Start a Telnet or SSH session, log in to the CDS
server, and enter the loginfo command without any arguments. Information on each facility is listed.
Configuring Logging Levels
All logging is configured at the System Level or Server Level. The configuration of the logging levels
at the Server Level overrides the System Level settings.
To set a log level for a facility at the System Level, do the following:
Step 1 Choose Configure > System Level > Logging. The Log page is displayed.
Step 2 From the Facility Name drop-down list, select a facility and click Display. The Log Level fields are
displayed.
The facilities list is based on the configuration of the system.