Specifications

4-35
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Note If the Media Importer is importing, any configuration changes to the Auto Import feature take
effect after current auto import is complete.
Step 3 Click Submit.
To reset the field, click Reset.
Configuring Call Signs
The CallSign Setup page is used to configure the call signs of the program channels.
Note The CallSign Setup is part of the Real Time Capture Type (non-Media Scheduler) optional feature.
A call sign is a unique identifier for a program channel. The channels, identified by their call signs, are
mapped to a multicast IP address and port that a content provider or satellite uses to send content by
using the Single-Program Transport Stream (SPTS) IP interface.
To configure a CallSign, do the following:
Step 1 Choose Configure > System Level > Callsign Setup. The CallSign Setup page is displayed
(Figure 4-13).
Weekly If weekly is chosen, choose the days of the week and the time of day (24-hour
clock format) when the EPG file should be imported.
Media Exporter Settings
1
Pre-Notification How much time (in seconds) prior to the start of a content program should the
catalog server be notified to advertise the program to the set-top box.
Notify URL Prefix Used to notify a catalog server that a real-time program is about to begin and to
fetch the offering from the backoffice. An example of the prefix URL follows:
http://10.74.124.131/Notification.asp.
Notify Host IP IP address of the notify host.
Notify Host Port Port number used to communicate with the notify host.
1. Media Exporter is applicable only when the Transformer Type is set to OCN.
Table 4-13 Media Importer/Exporter Fields (continued)
Field Description