Specifications

4-34
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Figure 4-12 Media Importer/Exporter Page
Step 2 Enter the settings as appropriate. See Table 4-13 for descriptions of the fields.
Table 4-13 Media Importer/Exporter Fields
Field Description
Media Importer Settings
Importer Type To upload the EPG using the CDSM, set the Importer Type to host. For
information on uploading an EPG file, see the “Uploading an EPG File” section
on page 7-20.
Transformer Type Transformer Type is configured at the time of initial installation and specifies
the EPG format of either OCN or SA Tribune. This is a read-only field.
Enable Auto Import To automatically import the EPG information, check the Enable Auto Import
check box. The Auto Import fields are displayed.
FTP Server IP IP address of the FTP server that is used to send the EPG file.
FTP Path Directory path of the location of the EPG files on the FTP server. Enter the
relative or absolute path according to the configuration of the FTP server.
Mismatching the configuration could result in failure of Auto Import function.
Username Username, if required, to access the FTP server.
Password Password, if required, to access the FTP server.
Retry Count Number of times to retry connecting to the FTP server, if the connection fails.
Retry Interval Number of seconds to wait before retrying the connection to the FTP server.
Auto Import Schedule
Daily If daily is chosen (the default setting), enter the time of day the EPG file should
be imported using the 24-hour clock format.