Specifications

4-33
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Step 3 Click Submit to save the settings.
To clear the fields and start over, click Reset.
Configuring the Media Importer/Exporter
Note The Media Importer/Exporter is part of the Media Scheduler, which is an optional feature. Depending
on the transformer type that was selected when your CDS was initially configured, this page may only
show the Media Importer.
The Media Importer/Exporter page has two sections: Media Importer Settings and Media Exporter
Settings.
The Media Importer Settings allows you to specify the data feed import type used to populate the Media
Scheduler with data from an EPG file, as well as to configure the automatic import of the EPG files from
an FTP server. There are two ways to import an EPG file, one is to manually upload the file by using the
EPG Upload page (Uploading an EPG File, page 7-20), the other is to automatically import the EPG file
using the Media Importer page.
The Media Exporter Settings allow you to specify information for notifying a catalog server, or any other
server, when a content program is about to start.
To configure the Media Importer/Exporter, do the following:
Step 1 Choose Configure > System Level > Media Importer/Exporter (or Media Importer). The Media
Importer/Exporter page is displayed (Figure 4-12).
Table 4-12 Ingest Driver Server Fields
Field Description
Virtual IP Virtual IP address used to receive requests from the Ingest Driver client and
send responses to the Ingest Driver client.
Ingest Server Port The port number used for communication with the Ingest Driver client.
Default is 20000. The port number must be the same for both the Ingest Driver
server and the Ingest Driver client.
Number of threads Number of threads allowed for the Ingest Driver queue. The default is 50.