Specifications

4-32
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Figure 4-11 IP Nicknames Page
Step 2 Choose the IP address from the applicable drop-down list, either Cisco CDSM IP Addresses or
Configured QAM Gateway IP Addresses, and click Display.
Step 3 In the IP Nickname field, enter a nickname. The name can be from 5 to 20 characters in length and can
consist of uppercase and lowercase letters, numbers, and the underscore (_) or hyphen (-) symbols.
Step 4 Click Submit.
To reset the field, click Reset.
To edit or view a current IP nickname association, choose an IP address or nickname from the drop-down
list and click Display.
Configuring the Ingest Driver Server
The Ingest Driver Server page is used to configure the settings for the Ingest Driver server, which is
associated with the VVIM in a VVI with split-domain management. The Ingest Driver server is used by
the central Content Store at the centralized storage facility to receive requests from the Ingest Driver
client at the headend and send responses to the Ingest Driver client.
The Ingest Driver server and Ingest Driver client are part of the ISA Regionalization feature and the
Virtual Content Store feature. For more information, see the “ISA Regionalization” section on page 2-12
and the “Virtual Content Store” section on page 2-16.
Note The Ingest Driver Server page is only displayed on the VVIM if the Content Storage is set to Distributed.
For more information, see the “Content Storage” section on page F-9.
To configure the Ingest Driver server, do the following:
Step 1 Choose Configure > System Level > Ingest Driver Server. The Ingest Driver Server page is displayed.
Step 2 Enter the Ingest Driver server settings as appropriate. See Table 4-12 for descriptions of the fields.