User guide
www.cisco.com
Removing an existing near end camera preset
Tap Camera control as shown...
Tap More (
) followed
by Settings (
), as
shown...
Tap Remove.
Make your adjustments. Tap Exit to put changes into
eect. Note that in the case of more than one camera
connected, the settings shown here will apply to the main
camera only, irrespective of camera chosen as source.
If needed, scroll to show the camera preset to be
removed (
) and then tap > of that preset to expand
the menu (
). If you have more than one camera
connected to your system, you may choose camera.
Scroll down to Camera control and settings.
Tap this eld.
Camera whitebalance, exposure, and backlight compensation
Backlight compensation compensates for light behind you.
This drop-down list appears if more than one camera
is connected.
8
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
D14582.09 User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved. Version TC5.1, 02.2012
Contents
Settings
Getting started
Placing calls
Using directories
In-call features
Scheduled meetings
Getting started