User guide

www.cisco.com
Changing an existing near end camera preset
Tap Camera control as shown... ... then tap as
outlined to expand the menu
If needed, scroll to show the camera preset to be
updated (

) and then tap > of that preset to expand
the menu (

).
Rear position
Tap Update to current position.

Tap anywhere outside the menu to exit.
Changes to any of the Camera presets can be made any time.
Using the expanded menu, adjust camera pan, tilt
and zoom, as required. If you have more than one
camera connected to your system, a drop-down list
will let you choose which camera the preset change
will apply to.

This drop-down list appears if more than
one camera is connected.
7
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
D14582.09 User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved. Version TC5.1, 02.2012
Contents
Settings
Getting started
Placing calls
Using directories
In-call features
Scheduled meetings
Getting started