User guide

www.cisco.com

You may want to check how you appear on the

screen. To do this, tap Selfview as outlined...

If this reveals a need for camera adjustments,

then tap Camera control as outlined.

Use + and — to adjust the zoom and the

arrow keys to adjust the camera’s angle (



). If you have more than

one camera connected, a drop-down list will appear. Use this to

select the camera to adjust (



You may also dene or edit camera presets in this menu,

see

“Adding a near end camera preset” on page 6 for details.

Tap as outlined, or anywhere outside the

menu to exit Camera control.

Entering Camera Control will

also cause the system to show

selfview, so if you know that camera

adjustments are needed, you do not

have to activate selfview rst.

Selfview and camera control

Tap as outlined

to expand the menu,

if needed.





Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide

D14582.09 User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Contents

Settings

Getting started

Placing calls

Using directories

In-call features

Scheduled meetings

Getting started