User guide

www.cisco.com

You may gain access to your video system through its

web interface. To learn more about how to do that consult

the Administration Guide for your system. This guide is

available separately for download from www.cisco.com.

From the web interface you may generate snapshots of

the video stream from your system. You may also, under

certain circumstances, generate snapshots from the

outgoing video of the far end system.

However, you cannot take snapshots unless you have set

the Allow Web Snapshots to ON, as shown here.

Note that the far end may take snapshots of the outgoing

video of your system, even if you have set your system’s

Allow Web Snapshots to OFF.

Likewise, you will be able to take snapshots of the

outgoing video of the far end, even if the far end has set

Allow Web Snapshots to OFF, provided that you have

set your own system’s Allow Web Snapshot to ON.

Snapshots cannot be taken if the call is encrypted.

Encryption will disable the snapshot feature at both

ends, regardless of the local settings of the Allow Web

Snapshots parameter.

The web snapshot feature applies to Point-to-Point as

well as MultiSite calls (but only to unencrypted calls).

Administrator settings—Web Snapshots

Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide

D14582.09 User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Contents

Settings

Getting started

Placing calls

Using directories

In-call features

Scheduled meetings

Settings