Datasheet

Solution Overview
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 23
Table 12. HP DL320-G2 Server Configurations
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity HP Part Number Description
1 336549-001* DL320R02 P3.06/533 512 A1 US
2 287496-B21 512MB x 1 REG PC2100 DDR
1 230534-B21 40G 7.2K NHP ATA ALL
1 343791-B21 DL320/DL360 DVD/CDRW FLPY ALL
1 174574-B21 3rd PTYRK DL360G1/320 ALL (optional)
*336549-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, and 371 =
ADP.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
powercord options.
HP DL320-G3 Server with Pentium 4 3.4-GHz Processor
The DL320-G3, which requires Cisco OS 2000.4.1, is a high-performance server platform for
today’s unified communications applications. It supports up to 1000 Cisco Unified IP Phones on a
single server and up to 4000 Cisco Unified IP Phones when clustered properly. The required
processor is an Intel Pentium 4 3.4-GHz processor. No specific memory configuration is required
as long as 2 GB of memory is provided. Table 13 lists hardware configuration requirements for the
HP DL320-G3.
Table 13. Hardware Configuration Requirements for HP DL320-G3
(Order all the HP parts in this table to obtain a supported configuration.)
Quantity HP Part Number Description
1 370669-001* DL320R03 P3.4-1MB, 1GB, 80GB SATA
1 354563-B21 1GB UNREG PC3200 1X1GB Memory
1 349237-B21 80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1 374303-B21 DL320G3 DVD-ROM Drive
1 372702-B21 DL320G3 FLOPPY DRIVE (Required for installation of SW SATA RAID)
*370699-001 is a North American regional part number. For orders destined for other global regions, replace
the final three digits (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, 371 = ADP,
and AA1-PRC.
No regional part numbers (besides North America) ship with a power cord. Contact HP for specific
power cord options.
HP DL320-G4 Server with Pentium D 2.8-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications
Manager 5.0.3, is a high-performance server platform for today’s unified communications
applications. It supports up to 1000 Cisco Unified IP Phones on a single server and up to 4000
Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium D
2.8-GHz processor. No specific memory configuration is required as long as 2 GB of memory is
provided. This server is the configuration equivalent of the Cisco MCS 7825-H2-IPC1.Table 14 lists
the hardware configuration requirements for the HP DL320-G4.