Datasheet
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
Connectors
Table 2 describes the connectivity and connectors of the Cisco Video Surveillance 2520 Series IP Dome.
Table 2. Cisco Video Surveillance 2520 Series IP Dome Connectors
Item Specification
Network connectivity 10/100 BASE-TX Ethernet with RJ-45 connector
Video 3.5-mm service connector, provides analog video (use with included mini cable with BNC adapter during installation)
Audio
●
3.5-mm audio jack—audio input for optional external microphone and audio output for option external speaker
supported through Y-cable adapter
●
Two-way (full- or half-duplex), one-way or audio off
Alarm input Two logic-level programmable inputs
Alarm output Two logic-level programmable outputs
Power input 3-pin terminal
Software
Table 3 describes the primary features of the Cisco Video Surveillance 2520 Series IP Dome software.
Table 3. Cisco Video Surveillance 2520 Series IP Dome Primary Software Features
Item Specification
Activity detection Four user-definable motion detection areas; e-mail alert and FTP uploading of captured video or JPEG snapshots
triggered by motion alert
Video format NTSC and PAL
Day/Night settings Auto or manual day/night operation with user-definable thresholds
Image settings Configurable brightness, sharpness, contrast, saturation, and white balance
Overlay capabilities Time, date and text
Selectable bit rate Support for Constant Bit Rate or Variable Bit Rate (constant quality)
IP filtering Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings
Discovery Cisco Discovery Protocol, Bonjour Zero-Configuration discovery
Configuration
●
Browser-based using Internet Explorer 6.x with SP2 and later
●
Multiple user access levels with password protection
Specifications
Table 4 provides specifications of the Cisco Video Surveillance 2520 Series IP Dome.
Table 4. Cisco Video Surveillance 2520 Series IP Dome Mechanical Specifications
Item Specification
Housing Metal base and polycarbonate transparent cover with tamper-resistant mounting
LEDs Power and Ethernet
Dimensions (W x H) 6.10 x 4.64 in.
155 x 118 mm
Weight 3.1 lb 1.4 kg