Datasheet

ManualsBrandsCisco ManualsSecurity CamerasCIVS-IPC-2520V

Data Sheet

Cisco Video Surveillance 2520 Series Standard-Definition IP Dome

The Cisco

Video Surveillance 2520 Series IP Dome is a feature-rich digital camera designed for superior

performance in a wide variety of video surveillance applications. The camera employs MPEG-4 and MJPEG

compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution

(720 x 576), offering efficient network utilization while providing high-quality video. Two-way audio and contact

closures allow integration with microphones, speakers, and access control systems. This vandal-resistant dome is

designed to be deployed indoors. With its open, standards-based design, the camera provides an ideal platform for

integration and operation as an independent device or as part of a Cisco Video Surveillance network.

Figure 1 shows Cisco Video Surveillance 2520 series IP Dome.

Figure 1. Cisco Video Surveillance 2520 Series IP Dome

The Cisco Video Surveillance 2520 Series IP Dome offers a variety of benefits, including:

●

Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-

quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global

electronic shuttering to ensure natural color rendition, zero blooming and smear, and minimal motion blurring.

●

Dual streaming. The camera can stream MPEG-4 and MJPEG video simultaneously. Each video stream can

be configured with individual resolution, quality, and frame rate settings.

●

Embedded security and networking. The camera provides 802.1X authentication and hardware-based

Advanced Encryption Standard (AES). For enhanced bandwidth management, the camera supports

IP Multicast.

●

Event notification. The camera can examine designated areas in the video for motion activity and then notify

users or other applications when it detects activity that exceeds a predefined threshold. The camera also

provides two digital inputs and two digital outputs that can initiate specific actions when an alarm is detected.

●

Bidirectional audio. The camera supports full-duplex audio, and options for half-duplex operation.

●

Flexible power options. The camera supports Power over Ethernet (PoE) 802.3af, and 12 VDC or 24 VAC

power through an optional external power supply.

Summary of content (6 pages)

PAGE 1
Data Sheet Cisco Video Surveillance 2520 Series Standard-Definition IP Dome ® The Cisco Video Surveillance 2520 Series IP Dome is a feature-rich digital camera designed for superior performance in a wide variety of video surveillance applications. The camera employs MPEG-4 and MJPEG compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality video.
PAGE 2
Data Sheet ● Mounting options. The camera was designed for indoor mounting onto various surfaces. Mounting options include using the conduit case or a standard electrical junction box. The camera is equipped with a varifocal lens mounted to a manual pan and tilt mechanism that allows the camera to be rotated and placed at the proper angle. ● Day/Night operation. The camera provides true day/night operation and includes an IR filter that automatically switches to night mode in low-light scenes.
PAGE 3
Data Sheet Connectors Table 2 describes the connectivity and connectors of the Cisco Video Surveillance 2520 Series IP Dome. Table 2. Cisco Video Surveillance 2520 Series IP Dome Connectors Item Specification Network connectivity 10/100 BASE-TX Ethernet with RJ-45 connector Video 3.5-mm service connector, provides analog video (use with included mini cable with BNC adapter during installation) ● 3.
PAGE 4
Data Sheet Item Specification Standards Compliance Safety: EMC—Emissions: EMC—Immunity UL 60950-1 47CFR Part 15 (CFR 47) Class A EN50082-1 CAN/CSA-C22.2 No. 60950-1 AS/NZS CISPR22 Class A EN61000-6-1 EN 60950-1 CISPR22 Class A EN55024 IEC 60950-1 EN55022 Class A CISPR24 AS/NZS 60950-1 ICES003 Class A EN50130-4 VCCI Class A KN immunity series EN61000-3-2 EN6100-3-3 KN22 Class A CNS13438 Class A Operating temperature 0 to 50°C 32 to 122°F Figure 2.
PAGE 5
Data Sheet Package Contents Table 5 describes the items that ship with the Cisco Video Surveillance 2520 Series IP Dome. Table 5. Cisco Video Surveillance 2520 Series IP Dome Package Contents Item Cisco Video Surveillance 2520 Series IP Dome Quick Start Guide Regulatory Compliance and Safety Information Accessories: ● Mini cable with BNC adapter ● Y-cable for audio input/output ● Mounting template ● Conduit case ● Black cylindrical snap-on ferrite core (qty.