User guide

Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1

OL-6255-01

Documentation Updates

Required Software for APs with 802.11g Radios

If you are using WLSE to manage APs or bridges with 802.11g radios, the APs

must be running Cisco IOS version 12.2.15JA or later. WLSE is unable to push

configuration templates to APs with 802.11g radios that are running previous

versions.

Disable Pop-Up Blocker

While using WLSE, you should disable pop-up blocking software or add WLSE

to the “Allow” list.

What is WDS and Why Do I Need To Use It?

The second sentence in this section should read: The WDS provides control path

technologies that must be active on an AP in each AP subnet; a backup WDS can

also be defined in each AP subnet.

Specifying the Backup Location

The online help description for the Clear Log button in the Administration >

Backup and Restore > Configure screen is incorrect. The online help description

of the Clear Log button should say: Click the Clear Log button to delete from the

View Log File window the backup.log file that was created during the previous

backup or restore operation.

Displaying Current Reports

If you select Reports > Current, then click Help, in the Access Point Reports

(IOS) section, the following two reports should be removed because they only

apply to non-IOS APs:

• AP Filter Report

• AP Policy Report

Also, the hypertext links for the last two reports (EAP and MAC Failed

Authentication Report and Failed Authentication and Login Attempt per AP

Report) are incorrect.

Displaying Group Client Report

The description incorrectly describes the policy groups instead of the Group

Client Report. The help topic should read: The Group Client Report lists all policy

groups configured on each of the non-IOS APs in this group.