User guide

21
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1
OL-6255-01
Known and Resolved Problems
CSCsa12593 Authorization and authentication
are not configured in sync.
In AAA configurations, if you enable
authentication, the following commands are
created:
aaa authentication login default
group rad_admin
aaa authorization exec default local
group rad_admin
The AAA authentication is configured to
use only group rad_admin; however, the
authorization uses local and then
rad_admin, which breaks the login.
CSCsa13569 Conversion adds a dot in front of
domain name
When converting an AP from VxWorks to
IOS, a period is added to the beginning of
the domain name.
CSCsa16787 Wrong clock time zone for Eastern
time zone.
For the Eastern time zone setting, the time
zone names (-5 and recurring) are missing.
CSCsa17775 awcDot11DesiredSSIDMic
algorithm is not converted.
MIC and Key-hash parameters are not
converted in the encryption configuration.
CSCsa17779 For AP 350, dot 11 radio 1
commands are generated.
After converting an AP350, the startup
configuration has the dot 11 radio 1
commands.
CSCsa18431 Conversion hangs IOS AP if native
VLAN is not mapped to any SSID.
After conversion, the AP might lose
network connectivity if a native VLAN is
not mapped to any SSID.
CSCsa18948 Limit the class-map name to 40
characters.
The class-map commands are missing for
policy/protocol filter configurations.
CSCsa18954 Conversion adds the default
command login local and line con
0.
After conversion, the commands login local
and line con 0 are generated by default.
CSCsa19914 Address Filters are incorrectly
converted after conversion.
After conversion, MAC filters have permit
any as the default.
CSCsa20081 EtherType filter default action
cannot always be permit any
For the Ethertype filter, the converted
configuration has permit any as the default.
Table 4 Resolved VxWorks to IOS Conversion Bugs in WLSE (Continued)
Bug ID Summary Explanation