User guide

19
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1
OL-6255-01
Known and Resolved Problems
CSCee39723 Location Manager coverage is
displayed regardless of
operational RIF status.
When there is no radio measurement data (for
example, before running Radio Scan, you delete
Radio Monitoring or measurement data),
coverage display is estimated with the default
path-loss model and the transmit power
configuration parameter. Location Manager
does not display Coverage for radios that have
active faults on following items:
• RF Port Down
• RF Port Down by Admin
• Radio Down (Self-healing triggered)
Note This requires faults to be enabled
through the WLSE Fault page. In
addition, make sure “Display Coverage
for operational radio interfaces only” is
checked (default) in Location
Manager's Coverage Display Options.
CSCsa11677 Invalid selection causes loop of
error messages display.
When you select Configure > Templates, enter
a name and select IOS, then click Create New
Template > Categories > Network Interfaces
> Radio 802.11b/g, then select a channel for
Default Radio Channel and click a channel from
Least Congested Channel Search, an error
message appears saying that the default radio
channel must be set to the least congested
frequency to modify this field. When you click
OK, the same error message comes up
immediately and this operation loops.
Table 3 Resolved Problems in WLSE (Continued)
Bug ID Summary Explanation