User guide

Known and Resolved Problems
18
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1
OL-6255-01
CSCsa24492 WLSE cannot handle backslashes
in the some fields.
When using Microsoft Internet Explorer 6.0 on
Windows XP, backslashes are not interpreted
correctly. For example, if you select Devices >
Discover > Credentials > WLCCP > Radius
UserName and use a backslash in the user
name, Internet Explorer does not remember the
user name.
There is no workaround to this problem. This
does not occur when using Netscape.
CSCsa26884 Webserver index.html page
doesn’t load with localhost.
While upgrading the WLSE software,
sometimes the browser does not open when it is
launched.
To work around this problem, in the URL,
replace localhost with the IP address of the
machine or 127.0.0.1.
Table 3 Resolved Problems in WLSE
Bug ID Summary Explanation
CSCee15196 RM context is not reliably
restarted on APs when WDS is
rebooted.
If a WDS device is rebooted while radio
monitoring is turned on for APs registered to
that WDS, after the WDS comes back up, Radio
Monitoring for those APs might not restart.
CSCee30813 Self healing results are not
visible until inventory runs.
After Self Healing applies changes to
supporting APs due to a downed AP, the results
of the changes are not visible in WLSE until
after an inventory runs.
CSCee32662 Radio Manager sends wrong RM
request when non-WDS AP
reboots.
After you run radio monitoring on a non-WDS
AP for radios 11g/b only and then reboot the AP,
when the AP comes up, WLSE sends radio
measurement requests for both the interface
11g/b and 11a.
Table 2 Known Problems in the WLSE (Continued)
Bug ID Summary Explanation