User guide

Known and Resolved Problems

Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1

OL-6255-01

CSCsa12358 Wireless Client Detail Report

sometimes not showing correct

state.

Sometimes the wireless client detail report

doesn't show the correct state of the client. In the

reports it shows it as assocAndAuthenticated

when it should show it as none.

There is no workaround to this problem;

however, the Time Last Seen field, which

indicates the last time the client was seen by

WLSE to be associated with the AP, is correct.

If the client roams or reassociates to a different

AP, the client details are updated appropriately

to reflect the current association.

CSCsa12833 Pushing an unsupported image on

AP breaks the AP.

If you push a 12.2(11)JA image through WLSE

to an AP 1100 with a g radio, the AP crashes.

The 12.2(11)JA image not to supported on g

radios.

There is no workaround to this problem.

CSCsa13094 Editing rule based groups is not

recomputed.

When you create a rule-based group and edit the

group by changing any of its values, the group is

not updated with the changes.

To work around this problem, edit the group and

change its name. The group will show the

correct members. Edit the group again by

changing the name back to the original name.

CSCsa13695 Devices marked 'd'/Deleted show

in Manage/Unmanage search.

When you delete a device, the device still

appears when you search in the

Manage/Unmanage folder. The deleted devices

continue to show in the manage/unmanage

search until they are removed from WLSE,

which could take up to 24 hours.

There is no workaround to this problem.

Table 2 Known Problems in the WLSE (Continued)

Bug ID Summary Explanation