User guide

11
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.1
OL-6255-01
Known and Resolved Problems
WLSE Problems
Table 2 Known Problems in the WLSE
Bug ID Summary Explanation
CSCeb36372 The Client Historical Association
report does not contain a
disassociation time.
The Client Historical Association report does
not have information about the last time a client
associated with the AP, the time it disconnected
from the AP, the duration of the association, or
the association state.
There is no workaround for this problem.
Note In the current release, only association
times of a client are supported.
Disassociation time of the client is not
available in this release.
CSCec41188 You cannot add an AP-based
LEAP server to the WLSE if it is
already a managed by WLSE.
You cannot add an AP-based Leap server to
WLSE if that AP is already being managed by
WLSE. The WLSE views it as a duplicate
device.
There is no workaround for this problem.
CSCed55402 When you set the WEP Enforced
policy under Faults > Manage
Faults the faults are not generated
correctly.
When the WEP Enforced policy is set for the
radio interface of an IOS access point,
sometimes the faults may not be generated due
to an access point bug (see CSCed39748).
There is no workaround for this problem.
CSCed89308 RPG Stop Calculation does not
work, only when job is rerun.
If you are rerunning a radio parameter
generation job, you cannot stop the parameter
calculations once they have begun. Although the
window displays “Stopping Calculations,” the
process does not stop.
If you are running radio parameter generation
for the first time, this problem does not appear.
There is no workaround for this problem.