User guide

7
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.11
OL-6775-01
Known Problems
Known Problems
Table 2 describes problems known to exist in this release. Table 3 describes
problems resolved since the last release.
Note To obtain more information about known problems, access the Cisco Software
bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. (You will
be prompted to log into Cisco.com.)
WLSE Problems
Table 2 Known Problems in the WLSE
Bug ID Summary Explanation
CSCeb36372 The Client Historical Association
report does not contain a
disassociation time.
The Client Historical Association report does
not have information about the last time a client
associated with the AP, the time it disconnected
from the AP, the duration of the association, or
the association state.
There is no workaround for this problem.
Note In the current release, only association
times of a client are supported.
Disassociation time of the client is not
available in this release.
CSCec41188 You cannot add an AP-based
LEAP server to the WLSE if it is
already a managed by WLSE.
You cannot add an AP-based LEAP/EAP-FAST
server to WLSE if that AP is already being
managed by WLSE. The WLSE views it as a
duplicate device.
There is no workaround for this problem.