User guide

11
Release Notes for the CiscoWorks Wireless LAN Solution Engine, Release 2.11
OL-6775-01
Known Problems
CSCsa63479 After logging in, the WLSE GUI
gets stuck on the Loading...
screen.
Because the tomcat process does not attempt to
re-start, when you log in to the WLSE, the GUI
gets stuck on the Loading ... screen indefinitely.
To work around this problem, ensure the
gateway is up, and reboot the WLSE.
CSCsa67792 Backup schedule is not synced up
after a switchover.
The backup schedule does not sync up after a
switchover.
To work around this problem, set the backup
schedules on both WLSE systems before
enabling HA. The backup will then run from the
active server when HA is enabled.
CSCsa67922 Unable to import MAC address
from file in Solaris.
In Japanese Solaris clients, the MAC address list
can not be imported into the advanced Discover
options.
The problem doesn't occur in Windows client.
There is no workaround to this problem.
CSCsa68100 HA related faults are not
generated when the standby
becomes active.
When the Standby WLSE becomes the active
WLSE, it fails to generate the corresponding
HA (High Availability) related fault.
However, the active WLSE can still generate all
other non-HA related faults on the APs,
switches, and routers.
There is no workaround to this problem.
CSCsa68203 RPG parameters are not applied
when they are scheduled using
XML.
The RPG jobs that are created using XML are
being executed, but the results are not applied.
This only happens when RPG Jobs are created
using XML.
To work around this problem, use MOM to
schedule the jobs.
Table 2 Known Problems in the WLSE (Continued)
Bug ID Summary Explanation