Specifications

16 Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions

Replacing or Upgrading the Chassis

Figure 7 Sliding the Chassis into the Rack (Shown with Card Cage Assembly and

Blower Installed)

Step 4

Slide the chassis back into the rack along the ledges until the ears meet the front mounting

posts on both sides of the rack. (See Figure 7.)

Step 5 Secure each ear to the rack-mounting post with two 10-32 x 5/8-inch, phillips pan-head

screws.

This completes the procedure for moving the chassis into the rack.

H3177

POWER