Specifications

This document may be freely reproduced and distributed whole and intact including this Copyright Notice.

Figure 3 – 3825 Front Panel Physical Interfaces

The Cisco 3825 router features a console port, auxiliary port, dual Universal Serial Bus (USB)

ports, four high-speed WAN interface card (HWIC) slots, two10/100/1000 Gigabit Ethernet

RJ45 ports, two Enhanced Network Module (ENM) slots, small form factor pluggable (SFP),

redundant power supply (RPS) inlet, power inlet, and Compact Flash (CF) drive. The 3825

router has slots for AIM-VPN/SSL-3 cards

, and two Ethernet connections. Figure 2 shows the

rear panel and Figure 3 shows the front panel. The front panel consists of 12 LEDs: CF LED,

SYS LED, ACT LED, SYS PWR LED, RPS LED, AUX PWR LED, AIM0 LED, AIM1 LED,

PVDM0 LED, PVDM1 LED, PVDM2 LED, and PVDM3 LED.

The back panel contains LEDs to indicate the status of the GE ports.

The front panel contains the following:

• LEDs

• Power switch

• Power input

• CF drive

• USB ports

The rear panel contains the following:

• HWIC/WIC/VIC slots 0 and 1

• Console port

• Auxiliary port

• GE ports

• ENM Ports

• SFP Port

The following tables provide more detailed information conveyed by the LEDs on the front and

rear panel of the router:

The security policy covers the configuration in which one AIM card is used.