Installation guide

11
Installing AC Power Supplies in Cisco 2691 Routers
78-13819-01
Replacing the Cisco 2691 Power Supply
Figure 5 Removing the Cisco 2691 Power Connector
Step 5 The Cisco 2691 power supply is held in the chassis by three external mounting screws at the rear of the
router. (See Figure 6.) Remove the screws and set them aside.
Figure 6 Cisco 2691 Power Supply Mounting Screws
Step 6 Slide the power supply back slightly in the chassis. This disengages the hooks built into the chassis that
help secure the power supply. (See Figure 7 and Figure 8.)
62511
62752
Mounting
screws
Power
supply