Installation guide

10
Installing AC Power Supplies in Cisco 2691 Routers
78-13819-01
Replacing the Cisco 2691 Power Supply
Figure 4 Cisco 2691 Compact Flash
Step 2 Remove the Compact Flash memory retention screw and set it aside. (See Figure 4.)
Step 3 Lift the Compact Flash memory card up and away from the Compact Flash receptacle and set it aside.
(See Figure 4.)
Step 4 Find the large power connector on the motherboard and remove it. (See Figure 5.)
Note On a Cisco 2691 router, you can simply lift the connector away from the receptacle. (See
Figure 5.)
62478
Compact Flash
memory card
Retention screw