Datasheet

© 2004 Cisco Systems, Inc. All right reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 11 of 26
Figure 6. EPII-PLUS Encryption AIM
The AIM ATM provides a high-performance hardware-based ATM access solution for one to four T1 or E1 connections supported by the T1 or E1
VWICs (for example, VWIC-1MFT-T1). This frees the network module slot to support other functions. When used in combination with a high-
density voice network module (part number NM-HDV-xxx), the ATM AIM supports AAL2 and AAL5 VoATM. In addition, the AIM-VOICE-30
and AIM-ATM-VOICE-30 AIMs provides a cost-effective solution for supporting voice services or digital voice over ATM (AAL2 and AAL5)
support, without the use of a network module. (Refer to Table 7 for the complete list of supported AIM modules for the Cisco 2600 Series.)
CISCO IOS SOFTWARE FEATURE AVAILABILITY
The Cisco 2600 Series offers a wide range of Cisco IOS Software features. This includes a variety of intranet, multiprotocol, QoS, and security
applications in use today. Beginning in Release 12.3 Mainline, the Cisco 2600 Series feature sets have been condensed into eight cross-platform
feature sets and up to nine additional special-purpose feature sets.
The cross-platform feature sets include the following:
• IP Base
• IP Voice
• Enterprise Base
• Enterprise Services
• Advanced IP Services
• Advanced Enterprise Services
• SP Services
• Advanced Security
The following special-purpose feature sets are offered in addition:
• Enterprise/Enterprise Cisco Systems SNA Switching Services (SNASw) Plus IPSec 3DES
• Enterprise/SNASw Plus
• Enterprise Services
• Enterprise Plus/H.323 Multimedia Conference Manager (MCM)
• Enterprise Service Selection Gateway (SSG) (Cisco 2650 and Cisco 2651XM only)