Datasheet

ManualsBrandsCisco ManualsNetworkingCISCO2610XM-RPS

Page 1 of 25

DATA SHEET

CISCO 2600 SERIES MODULAR ACCESS ROUTERS, INCLUDING

THE CISCO 2600XM MODELS AND THE CISCO 2691

The Cisco

2600 Series is an award-winning series of modular multiservice access routers, providing flexible LAN and WAN

configurations, multiple security options, voice and data integration, and a range of high-performance processors. The wide

range of features and interfaces and the flexibility of adding more than 50 modules makes the Cisco 2600 Series the ideal

branch-office router for today’s and tomorrow’s customer requirements.

The Cisco 2600 Series of modular routers includes the Cisco 2612, Cisco 2600XM models, and the Cisco 2691 (see Figure 1).

These models deliver extended performance, high density, enhanced security performance, and concurrent application

support to meet the growing demands of branch offices. In addition, numerous Cisco 2600 Series product bundles have been

introduced (Refer to Table 9). These bundles offer an additional cost savings and provide easy ordering to meet branch-office

requirements.

Figure 1. Cisco 2600 Series Modular Access Routers

PRODUCT OVERVIEW

Cisco 2600 Series Modular Access Routers: Introduction

As companies grow, the diversity of protocols, increased performance, LAN media, WAN services, and networking equipment required to support

mission-critical network services expand dramatically. With extensive support for multiprotocol data routing, voice and data integration, DSL

access, ATM, dial access services, and integrated switching, the Cisco 2600 Series provides a flexible, scalable, integrated solution that simplifies

the process of deploying and managing the branch-office network solutions.

The Cisco 2600 Series offers a comprehensive feature set ideal for solutions requiring the following support:

• Multiservice voice and data integration

• VPN access with firewall and encryption options

• Analog dial access services

• Routing with bandwidth management

• Inter-VLAN routing

Summary of content (26 pages)

PAGE 1
DATA SHEET CISCO 2600 SERIES MODULAR ACCESS ROUTERS, INCLUDING THE CISCO 2600XM MODELS AND THE CISCO 2691 ® The Cisco 2600 Series is an award-winning series of modular multiservice access routers, providing flexible LAN and WAN configurations, multiple security options, voice and data integration, and a range of high-performance processors.
PAGE 2
• Delivery of high-speed business-class DSL access • Cost-effective ATM access • Integration of flexible routing and low-density switching • Integration of content networking • Integration of intrusion detection systems (IDSs) • Integration of network analysis systems ® The foundations of these solutions are the Cisco IOS Software elements of security, availability, quality of service (QoS), manageability, and integration.
PAGE 3
Table 1.
PAGE 4
• Integration of content networking and branch-office routing—With the integration of an optional content-engine network module with branchoffice routing, Cisco offers the industry’s first and only router-integrated content-delivery system. Combining intelligent caching, content routing, and management with robust branch-office routing, WAN bandwidth is conserved for important branch IP services such as voice over IP (VoIP), while simplifying configuration, deployment, and operations.
PAGE 5
Feature Benefit LAN and WAN Connectivity Integrated into Chassis • Voice and WIC support can be used for WAN (data-only) connectivity and then redeployed to support channelized voice and data or packet voice applications. • The Cisco 2600 Series offers integrated 10/100 Ethernet ports on most platforms. • A combination of AIMs and WICs along with network modules provides greater flexibility to create new configurations as requirements change.
PAGE 6
Feature Benefit Security • Cisco IOS Firewall feature sets provide support for advanced security features such as Context-Based Access Control (CBAC), Java blocking, denial-of-service protection, intrusion prevention, and audit trails. • Network Admission Control (NAC) support provides Anti-virus protection and is available with an optional upgrade to a Cisco IOS Security image.
PAGE 7
Feature Benefit Simplified Management Cisco Router and Security • The Cisco SDM is an intuitive, easy-to-use, Web-based device management tool embedded within the Device Manager (SDM) Cisco IOS Software access routers. The Cisco SDM helps enable resellers and customers to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS Command-Line Interface (CLI).
PAGE 8
Figure 2. Cisco 16-Port EtherSwitch Network Module Cisco content-engine network modules offer the industry’s first and only router-integrated content-delivery system (see Figure 3). Combining intelligent caching, content routing, and management with robust branch-office routing conserves WAN bandwidth for important branch IP services such as VoIP, while simplifying configuration, deployment, and operation. Figure 3.
PAGE 9
Figure 4. Cisco IDS Network Module The Cisco Network Analysis Module (NAM) addresses the need for multiservice network management and traffic monitoring in enterprise branch offices. The Cisco 2600, Cisco 3660, and Cisco 3700 series NAM is an integrated traffic-monitoring network module that helps enable network managers to gain application level visibility into network traffic with the ultimate goal of improving performance, reducing failures, and maximizing return on network investments.
PAGE 10
Figure 5. Dual-Port Multiflex T1 VWIC with Drop and Insert The dual-port serial WICs feature the new Cisco compact, high-density smart serial connector to support a wide variety of electrical interfaces when used with the appropriate transition cables. Ports on each card can be configured individually to support a variety of synchronous or asynchronous protocols. AIM Options All Cisco 2600 Series routers are equipped with an internal slot to support one or two field-installable AIMs.
PAGE 11
Figure 6. EPII-PLUS Encryption AIM The AIM ATM provides a high-performance hardware-based ATM access solution for one to four T1 or E1 connections supported by the T1 or E1 VWICs (for example, VWIC-1MFT-T1). This frees the network module slot to support other functions. When used in combination with a highdensity voice network module (part number NM-HDV-xxx), the ATM AIM supports AAL2 and AAL5 VoATM.
PAGE 12
• Voice IP to IP Voice Gateway (Cisco 2600XM only) • Voice IP to IP Voice Gateway IPSec 3DES (Cisco 2600XM only) • IP/H.323 • Telco Feature Set (Cisco 2600XM only) • Remote Access Server • INT VOICE/VIDEO, IPIP GW, TDMIP GW • INT VOICE/VIDEO, IPIPGW, TDMIP GW AES Cisco IOS Software Release 12.3 Mainline and prior releases contain a traditional set of features sets, including IP, IP Plus, Enterprise, and many others.
PAGE 13
Application Cisco 2612 Cisco 2610-51XM Cisco 2691 DSL Connections 4 4 5 Cisco EtherSwitch Ports 16 16 16 Token Ring Ports 1 0 1 Gig Ethernet Ports 0 0 1 (1) Requires a Cisco 2650XM for 90 channels Table 4.
PAGE 14
Cisco 2600 Series Models Cisco 2612 Cisco 2610 and Cisco 2611XM Cisco 2620 and Cisco 2621XM Cisco 2650 and Cisco 2651XM Cisco 2691 Power Output 5V @ 9.5A, 12V @ 5V @ 9.5A, 12V @ 5V @ 9.5A, 12V @ 5V @ 9.5A, 12V 5V @ 15A, 3.3V @ 1.20A, -12V @ 0.5A 1.20A, -12V @ 0.5A 1.20A, -12V @ 0.5A @ 1.20A, -12V @ 12A, 12V @ 5A, -12V 0.5A @ 2A AC Input Voltage 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC AC Input Current 1.5A 1.5A 1.5A 1.
PAGE 15
Table 5. Cisco 2600 Series Network Modules Product Number Description Cisco 2612 Cisco 2600XM Cisco 2691 X X X Serial and ATM Network Modules (requires Cisco IOS Software Release 11.
PAGE 16
Product Number Description Cisco 2612 Cisco 2600XM NM-1FE-FX-V2 1-port Fast Ethernet network module, FX only NM-2W 2 WIC slot network module, (WAN I/F cards offered separately) X X NM-1E 1-port Ethernet network module X X NM-4E 4-port Ethernet network module X X NM-1ATM-25 1-port ATM 25-Mbps network module X X NM-1GE 1-port Gigabit Ethernet network module NM-1T3/E3 (12) Cisco 2691 X X X 1-port Clear Channel X X NM-CEM-4TE1 4-port T1/E1 circuit emulation over IP network modul
PAGE 17
Product Number Description NM-16AM-V2 16-port analog modem network module with V.
PAGE 18
Product Number Description (5) EM-HDA-4FXO Cisco 2612 Cisco 2600XM Cisco 2691 X X X 1-port 30-channel J1 high-density voice network module X X X 1-port 30-enhanced channel J1 high-density voice network X X X 4-port voice and fax expansion module, foreign exchange office (FXO) NM-HDV-1J1-30 (7) NM-HDV-1J1-30E (7) module NM-HDV-FARM-C36 (10) Network module 36-port DSP farm bundle X11 X X NM-HDV-FARM-C54 (10) Network module 54-port DSP farm bundle X11 X X NM-HDV-FARM-C90 (10
PAGE 19
Product Number Description Cisco 2612 Cisco 2600XM Cisco 2691 X X VSAT Satellite Module NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module 1. The voice and fax and ATM network modules require a Cisco IOS Plus Software feature set 2. Requires Cisco IOS Software Release 12.05XK, 12.07T, 12.1, 12.1T, 12.2, 12.2T, or later 3. Requires Cisco IOS Software Release 12.07XK, 12.12T, 12.2, 12.2T, or later 4. Requires Cisco IOS Software Release 12.1.2T or later 5.
PAGE 20
Product Number VIC-2FXO-M2 (2) Description Cisco 2612 Cisco 2600XM Cisco 2691 2-port FXO voice and fax interface card with caller ID and supervisory X X X disconnect (Europe version) VIC-2FXO-EU 2-port FXO voice and fax interface card (Europe version) X X X VIC-2FXO-M3 2-port FXO voice and fax interface card for Australia X X X VIC-2E/M 2-port E&M voice and fax interface card for voice and fax network X X X X X module VIC2-2E/M 2-port E&M voice and fax interface card for voice a
PAGE 21
Product Number VWIC-2MFT-E1-DI (1) Description Cisco 2612 Cisco 2600XM Cisco 2691 2-port E1/fractional E1 multiflex trunk with DSU and drop X X X and insert VWIC-1MFT-G703 (2) 1-port G.
PAGE 22
Product Number Description Cisco 2612 Cisco 2600XM AIM-COMPR2 Data compression AIM for Cisco 2600 Series X X AIM-COMPR2-V2 8-Mbps compression AIM AIM-COMPR4 (2) Cisco 2691 X Data compression AIM for Cisco 2691, Cisco 3660, and Cisco 3700 X Series AIM-VPN/BP DES/3DES data VPN encryption AIM for Cisco 2600 Series AIM-VPN/BPII X DES/3DES/AES VPN encryption and compression module for X X Cisco 2600XM AIM-VPN/BPII-PLUS DES/3DES/AES VPN encryption and compression module for X Cisco 2600XM
PAGE 23
1. PVDM2s can be used only in conjunction with the high-density digital voice (HDV2) network modules. ORDERING INFORMATION To place an order, visit the Cisco Ordering Home Page. Table 10.
PAGE 24
Product Name Part Number Cisco 2651XM, FL-SRST-MEDIUM, AIM-VOICE-30, IP Voice, 256D/32F CISCO2651XM-V-SRST Cisco 2651XM, 48-phone CCME, AIM-ATM-VOICE30, 256D/32F, add VWIC CISCO2651XM-V-CCME Cisco High-Performance 10/100 Dual Ethernet Router with 3 WIC slots, 1 network module, 32F/256D CISCO2691 Cisco 2691 Router with Universal Power Supply 24/48 volts, 32F/256D CISCO2691-DC-U Cisco High-Performance 10/100 Dual Ethernet Router with 3 WIC slots, 1 network module, 32F/256D— CISCO2691-RPS redundant
PAGE 25
FOR MORE INFORMATION For more information about the Cisco 2600 Series, visit: http://www.cisco.com or contact your local account representative. Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.cisco.