Data Sheet

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 16
Product Description
EMC Immunity
●
EN300386
●
EN55024(CISPR24)
●
EN61000-4-2
●
EN61000-4-3
●
EN41000-4-4
●
EN41000-4-5
●
EN41000-4-6
●
EN41000-4-8
●
EN41000-4-11
●
EN50082-1
●
EN61000-6-2
●
ITU-T K.21
EMC Emissions
●
CFR 47 Part 15, Class A
●
ICES-003 Class A
●
EN55022 Class A
●
CISPR22 Class A
●
AS/NZS 3548 Class A
●
VCCI Class A
●
EN 300386
●
EN61000-3-2
●
EN61000-3-3
Telecommunications
●
Telecom compliance standards depend upon country and interface type. Interfaces
comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive
99/5/EC, and relevant Technical Basis for Regulation (TBRs). For specific information,
refer to the data sheet for the specific interface card.
●
Homologation requirements vary by country and interface type. For specific country
information, refer to the online approvals database.
Cisco 1801, 1802, 1803, and 1812 ISDN BRI S/T:
●
TIA-968-A
●
IC CS-03 Part VI
●
JATE Technical Requirements
●
TBR3
●
S031
ADSL2+ Support
Table 4 lists the ADSL2+ (Asymmetric Digital Subscriber Line 2+) support provided through Cisco
IOS Software Release 12.4(4)T.
Table 4. ADSL2/2+ Support (Annex A, Annex B and Annex M)
DSLAM Line card Line card Chipset DSLAM Firmware
Alcatel 7300 ADSL2+ POTS BRCM L7D6AA47.020
Lucent Stinger ADSL2+ POTS GSPN 9.7.1e64
Alcatel 7300 ADSL2+ ISDN BRCM L7D6AA47.020
Lucent Stinger ADSL2/2+ POTS (Annex
A & Annex M)
stngr-72-gs-adsl-
card/Conexant
9.9.1 (E.67.1.36)
ECI SAM480 ADSL2/2+ POTS (Annex
A & Annex M)
ATUC-32/Infineon A4_9.00.56
Ericsson EDA2.1 ADSL2/2+ POTS (Annex
A & Annex M)
EDN312xp/Broadcom CXC 132 7380 R2C09
Alcatel 7300 ADSL2+ ISDN (Annex B) ADLT-F (24-port)/Broadcom L7D6AA47.020