Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 13 of 21
– d. Total DSP requirement is the sumof a, b and c. The DSPresources can not be shared between analogVICs,
BRI VIC and VWICs
2. For the EarlyDeployment (ED)releases: CiscoIOS 12.2(8)YNor later ( Note: notinclude 12.2(11)YT)or Ttrain
releases 12.3(1)T or later, please always refer to the DSP Calculator in the following link:
http://www.cisco.com/cgi-bin/Support/DSP/cisco_prodsel.pl
The DSP calculator optimizes the DSP resources for your configuration and suggests CLI configurations.
Table 8 DSP Firmware for each type of VICs
VIC Type Firmware Support
2-port Analog VICs HC (default), MC ( starting from 12.2(8)YN)
4-port Analog VIC HC, MC (default, starting from 12.2(8)YN)
VIC-2BRI-NT/TE HC (default for ED releases prior to 12.2(8)YN or
T train releases prior to 12.3(1)T); MC; Flexi-6
(default for ED releases 12.2(8)YN or later or T
train releases 12.3(1)T or later)
T1/E1 VWICs Flexi-6 (default)
Table 9 Cisco IOS Support for DSP firmware
Firmware Support IOS Release Support
HC In all orderable IOS Releases
MC ED Releases: Cisco IOS 12.2(8)YN or later
1
T Train Releases: Cisco IOS 12.3(1)T or later
1. It doesn’t include Cisco 12.2(11)YT. 12.2(11)YT doesn’t support MC.
Flexi-6 For T1/E1 VWICs:
• ED Releases: Cisco IOS 12.2(4)YB or later
2
• T Train Releases: 6th releases of 12.2(15)T or
later
For VIC-2BRI-NT/TE:
• ED Releases: Cisco IOS 12.2(8)YN or later
3
• T Train Releases: Cisco IOS 12.3(1)T or later
2. It doesn’t include Cisco 12.2(11)YT. 12.2(11)YT doesn’t support Flexi-6.
3. It doesn’t include Cisco 12.2(11)YT. 12.2(11)YT doesn’t support Flexi-6.
Table 10 10 The number of channels supported by one DSP (PVDM-256K-4) per codec type
Firmware
Codec HC (for analog & BRI VICs) MC ( for analog & BRI VICs) Flexi 6 (for VWICs & BRI VIC
1
)
G.711 24 6
G.729
2
/G.729a 24 3
G.726 24 3
G.723 2- 2