Installation Guide

ManualsBrandsCisco ManualsCollaboration EndpointsCisco Wireless-N Bridge for Phone Adapters

Cisco Systems, Inc.

www.cisco.com

Small Business Support

www.cisco.com/go/sbsc

Cisco and the Cisco Logo are trademarks of Cisco

Systems, Inc. and/or its affiliates in the U.S. and other

countries. A listing of Cisco's trademarks can be found at

www.cisco.com/go/trademarks. Third party

trademarks mentioned are the property of their

respective owners. The use of the word partner does not

imply a partnership relationship between Cisco and any

other company. (1005R)

reserved.

Quick Start Guide

78-20173-01B0

Cisco Small Business

WBPN Wireless-N Bridge for

Phone Adapters

Before You Begin

Before you begin the installation,

make sure that you have the

following equipment and

information:

• Power Supply for your Small

Business IP Phone (not included)

• PC to use the web-based

system management tools to

configure the WBPN (required if

you are not using Wi-Fi

Protected Setup)

Configuring the Wireless-N

Bridge for Phone Adapters

WBPN Connections

1 Power adapter port

2 WBPN power cable

3 Network cable

4 Reset button

5 Wi-Fi Protected Setup

(WPS) button

283688

1 2 3

Phone Connections

6 WLAN LED

7 WPS LED

8 System LED

1 Power adapter port

2 Ethernet port

283689

Summary of content (2 pages)

PAGE 1
Configuring the Wireless-N Bridge for Phone Adapters 2 Quick Start Guide 1 2 3 6 WLAN LED 7 WPS LED 8 System LED Cisco Small Business WBPN Wireless-N Bridge for Phone Adapters 8 6 5 7 4 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.
PAGE 2
Connecting the WBPN If your wireless device supports Wi-Fi Protected Setup (WPS), you can connect the WBPN to the phone and use WPS to connect the phone your network. If you do not use WPS, you must connect the WBPN to a PC and use a web browser to configure it. See the User Guide located on Cisco.com for more information. (For the location, see the Where to Go from Here section.) 1 If the IP phone power adapter is connected to your IP phone, disconnect it.