Leaflet

(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− −−−− −−−−−−−− −−−−−−−−−−−−−−− −−−−−−− −−−−−− −−−−
ap−manager 2 untagged 10.77.244.207 Static Yes N
management 2 untagged 10.77.244.206 Static No N
service−port N/A N/A 50.0.0.1 Static No N
virtual N/A N/A 1.1.1.1 Static No N
vlan 15 2 15 192.168.15.10 Dynamic No N
Define the WLAN.
The command is config wlan create wlan_id name .
(lab5wlc4404ip15) >config wlan create 2 "vlan 15"
6.
Define the interface for the WLAN.
The command is config wlan interface wlan_id interface_name .
(lab5wlc4404ip15) >config wlan interface 2 "vlan 15"
7.
Verify the WLAN and the associated interface.
The command is show wlan summary.
(lab5wlc4404ip15) >show wlan summary
Number of WLANs.................................. 2
WLAN ID WLAN Name Status Interface Name
−−−−−−− −−−−−−−−−−−−−−−−−−−− −−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
1 lab5wlc4404ip15 Enabled management
2 vlan 15 Disabled vlan 15
(lab5wlc4404ip15) >
8.
Click this link in order to view a Cisco Support Community video that describes how to configure VLANs on
Wireless LAN controllers:
VLANs on Wireless LAN Controllers