Leaflet

Enter the Interface Name and VLAN Identifier and click Apply.2.
Enter the parameters specific to this VLAN. Some of the parameters include the IP Address, Netmask,
Gateway, and the DHCP server IP address, and click Apply.
Here is an example.
Note: The IP address assigned to this interface acts as the DHCP relay for a client to obtain an IP
address from the DHCP server. For example, when a client attempts to associate to a WLAN/SSID
(see step 5 in this configuration) mapped to this dynamic interface, it performs a local subnet
broadcast to identify the DHCP server. The controller sends a request to the DHCP server (or to itself
if it is the DHCP server for the segment) with the IP address of this dynamic interface as relay IP to
3.