User guide

4-28
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 4 Controller Menu Bar Selection
QoS Profiles
Edit QoS Profile
Use CONTROLLER > QoS Profiles then click Edit to navigate to this page. The top of the main page
lists the selected Quality of Service profile name. Use this page to edit the following OS QoS parameters.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Reset to default: Reset the parameters to the factory default.
• Help: Request that the help page be displayed in a new browser window.
Table 4-20 QoS Profile Parameters
Parameter Description
Description Operator-Defined description for this QoS Profile.
Average Per-User
Contract Data Rate
0 to 60,000 bits per second. Operator-defined average data rate for non-UDP
traffic. Default 0 = OFF.
Burst Per-User Contract
Data Rate
0 to 60,000 bits per second. Operator-defined peak data rate for non-UDP
traffic. Default 0 = OFF.
Average Per-User
Contract Real-Time Rate
0 to 60,000 bits per second. Operator-defined average data rate for UDP
traffic. Default 0 = OFF.
Burst Per-User Contract
Real-Time Rate
0 to 60,000 bits per second. Operator-defined peak data rate for UDP traffic.
Default 0 = OFF.
Maximum QoS RF usage
per AP
1 to 100%. Maximum air bandwidth available to a class of clients. Default
100%.
QoS Queue Depth 50 to 500. Depth of Queue for a class of client. Causes packets with a greater
value to be dropped at the access point. Nominally 100 for Bronze, 150 for
Silver, 255 for Gold, and 255 for Platinum.
Wired QoS Protocol Select 802.1P to activate 802.1P Priority Tags, or select None to deactivate
802.1P Priority Tags (default).
802.1P Tag 802.1P Priority Tag for the wired connection from 0 to 7. This is used for
traffic and LWAPP packets. Nominally 1 for Bronze, 3 for Silver, 4 for Gold,
and 6 for Platinum.