User guide

4-26
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 4 Controller Menu Bar Selection
NTP Servers
NTP Servers > Edit
Use CONTROLLER > Network Time Protocol then click Edit to navigate to this page.
This page allows you to change the NTP server. The following table describes the parameter you can
change.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.
Table 4-18 Edit Network Time Protocol Server Configuration
Parameter Description
Server Address IP address of the NTP server.