User guide

4-10
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 4 Controller Menu Bar Selection
Network Routes
Network Routes
Use CONTROLLER > Network Routes to navigate to this page.
This page provides a summary of existing Service port Network Routes to Network or Element
Management systems on a different subnet by IP Address, IP Netmask, and Gateway IP Address.
• Remove a Network Route by selecting the appropriate Remove link. You are prompted for
confirmation of the Network Route removal.
Command Buttons
• New: Select to add a new Network Route.
• Help: Request that the help page be displayed in a new browser window.
Network Routes > New
Use CONTROLLER > Network Routes then click New to navigate to this page.
Add a new Network Route for the Service port by entering the Route:
• IP Address - Destination network IP Address range.
• IP Netmask - Destination subnet mask.
• Gateway IP Address - IP Address of the Service Port gateway router.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.