User guide

2-31
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 2 Monitor Menu Bar Selection
Clients
The AP Properties table identifies the properties of the client’s access point and of the client’s negotiated
session.
Table 2-25 AP Properties
Parameter Description
AP Address MAC address of the access point.
AP Name Name of the access point.
AP Type Access point’s RF type.
WLAN SSID Name of the WLAN.
Status Status of client from status code (see Status Code below).
Association ID Client’s access point association identification number.
802.11 Authentication Authentication algorithm of client.
Reason Code The client reason code may be one of the following:
• no reason code (0) -- normal operation.
• unspecified reason (1) -- client associated but no longer authorized.
• previousAuthNotValid (2) -- client associated but not authorized.
• deauthenticationLeaving (3) -- the access point went offline,
de-authenticating the client.
• disassociationDueToInactivity (4) -- client session timeout exceeded.
• disassociationAPBusy (5) -- the access point is busy, performing load
balancing, for example.
• class2FrameFromNonAuthStation (6) -- client attempted to transfer
data before it was authenticated.
• class2FrameFromNonAssStation (7) -- client attempted to transfer data
before it was associated.
• disassociationStaHasLeft (8) -- Operating System moved the client to
another access point using non-aggressive load balancing.
• staReqAssociationWithoutAuth (9) -- client not authorized yet, still
attempting to associate with access point.
• missingReasonCode (99) -- client momentarily in an unknown state.