User guide

2-21
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 2 Monitor Menu Bar Selection
Rogue Clients
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Ping: Send a Ping to a network element.
Adhoc Rogues
Use MONITOR > Wireless > Adhoc Rogues or MONITOR > Summary > Adhoc Rogues to navigate
to this page.
This page lists Ad Hoc rogue information on the following table.
Command Button
• Help: Request that the help page be displayed in a new browser window.
Table 2-17 Rogue Clients
Parameters Description
MAC Address MAC address of the rogue client.
BSSID MAC address of the Cisco access point.
SSID Service Set Identifier being broadcast by the rogue client.
# Detecting Radios Number of Cisco radios detecting the rogue client.
Status The status of this radio is:
Pending (unidentified).
Alert (Unknown access point).
Known (Internal access point).
Acknowledge (External access point).
Contain (Rogue Access Point).