User guide

2-7
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 2 Monitor Menu Bar Selection
Ports Statistics
Ports > Statistics
Use MONITOR > Statistics > Ports and then click View Stats to navigate to this page.
This page displays statistics on a per port basis. The Port Number appears on the main data page directly
below the page title and above the Traffic Statistics tables. The following tables explain the port
statistics.
Table 2-4 Traffic Statistics
Parameter Received Description Transmitted Description
Total Bytes The total number of octets of data
(including those in bad packets)
received on the network (excluding
framing bits but including FCS octets).
This object can be used as a reasonable
estimate of Ethernet utilization. If
greater precision is desired, the
etherStatsPkts and etherStatsOctets
objects should be sampled before and
after a common interval. The result of
this equation is the value Utilization
which is the percent utilization of the
Ethernet segment on a scale of 0 to 100
percent.
The total number of octets of data
(including those in bad packets)
received on the network (excluding
framing bits but including FCS
octets). This object can be used as a
reasonable estimate of Ethernet
utilization. If greater precision is
desired, the etherStatsPkts and
etherStatsOctets objects should be
sampled before and after a common
interval.
Packets
(64 Octets)
The total number of packets (including
bad packets) received that were 64
octets in length (excluding framing bits
but including FCS octets).
The total number of packets
(including bad packets) received that
were 64 octets in length (excluding
framing bits but including FCS
octets).
Packets
(65-127 Octets)
The total number of packets (including
bad packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including
FCS octets).
The total number of packets
(including bad packets) received that
were between 65 and 127 octets in
length inclusive (excluding framing
bits but including FCS octets).
Packets
(128-255 Octets)
The total number of packets (including
bad packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including
FCS octets).
The total number of packets
(including bad packets) received that
were between 128 and 255 octets in
length inclusive (excluding framing
bits but including FCS octets).
Packets
(256-511 Octets)
The total number of packets (including
bad packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including
FCS octets).
The total number of packets
(including bad packets) received that
were between 256 and 511 octets in
length inclusive (excluding framing
bits but including FCS octets).
Packets
(512-1023 Octets)
The total number of packets (including
bad packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including
FCS octets).
The total number of packets
(including bad packets) received that
were between 512 and 1023 octets in
length inclusive (excluding framing
bits but including FCS octets).