User guide

2-2
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 2 Monitor Menu Bar Selection
Summary
Summary
Use MONITOR > Summary to navigate to this page.
The summary page provides a top level description of your controller, access points, clients, WLANs,
and rogues. Rogues are unauthorized devices (access points, clients) which are connected to your
network.
The controller image is displayed at the top of the summary page and gives information about the
controller model number and the number of access points supported by the controller.
The following table describes the parameters on this page. This page is refreshed every 30 seconds.
Note All parameters on this page are read-only parameters.
Table 2-1 Summary Parameters
Parameter Description
Controller Summary
Management IP Address Management IP address of the controller.
Service Port IP Address The IP address of the controller front-panel service port.
Software Version The version of the Operating System running on the controller.
System Name Controller name specified by the operator.
Up Time Time elapsed since the controller was last rebooted.
System Time Current time set on the controller.
Internal Temperature Current internal chassis temperature.
802.11a Network State Enabled or disabled.
802.11b/g Network State Enabled or disabled.
Access Point Summary
802.11a Radios Number of 802.11a Cisco radios. Click Detail for additional
information about 802.11a Radios.
802.11b/g Radios Number of 802.11b/g Cisco radios. Click Detail for additional
information about 802.11b/g Radios.
All APs Number of access points associated with this controller. Click Detail
for additional information about Cisco APs.
Client Summary
Current Clients Number of clients currently associated with the controller. Click
Detail for additional information about current Clients.
Excluded Clients Enable or disable automatic excluding for client computers by MAC
address.
Disabled Clients Number of clients that are currently disabled.
Rogue Summary
Active Rogue APs Number of unauthorized access points detected by controller. Click
Detail for additional information about active Rogue APs.