User guide

7-19
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 7 Management Menu Bar Selection
Local Management Users
Local Management Users
Use MANAGEMENT > Local Management Users to navigate to this page.
This page lists current management user logins on the controller and the users’ access privileges.
You may remove a user account by selecting Remove. Removing the default admin user prohibits both
Web and CLI access to the controller, so you must create a user provide with administrative (read/write)
privileges BEFORE you remove the default user.
Command Buttons
• New: Select to add a new management user (Local Management Users > New).
• Help: Request that the help page be displayed in a new browser window.
Local Management Users > New
Use MANAGEMENT > Local Management Users then click New to navigate to this page.
Use this page to add management user accounts on the controller and the user’s access privileges.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.
Table 7-22 Management User Details
Parameter Description
User Name Login user name.
Password Enter the user password. (Default = admin.)
Confirm Password Confirm the user password. (Default = admin.)
User Access Mode User privilege assignment can be ReadOnly or ReadWrite.