User guide

7-13
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 7 Management Menu Bar Selection
SNMP Trap Controls
Command Buttons
• Clear Log: Deletes all log entries. You are prompted for confirmation to delete the logs.
Table 7-19 Client Reason Code Descriptions and Meanings
Client
Reason
Code Description Meaning
0 noReasonCode normal operation
1 unspecifiedReason client associated but no longer authorized
2 previousAuthNotValid client associated but not authorized
3 deauthenticationLeaving the access point went offline, de-authenticating
the client
4 disassociationDueToInactivity client session timeout exceeded
5 disassociationAPBusy the access point is busy, performing load
balancing, for example
6 class2FrameFromNonAuthStation client attempted to transfer data before it was
authenticated
7
class2FrameFromNonAssStation
client attempted to transfer data before it was
associated
8 disassociationStaHasLeft the Operating System moved the client to
another access point using non-aggressive load
balancing
9 staReqAssociationWithoutAuth client not authorized yet, still attempting to
associate with an access point
99 missingReasonCode client momentarily in an unknown state
Table 7-20 Client Status Code Descriptions and Meanings
Client Status
Code Description Meaning
0 idle normal operation -- no rejections of client
association requests
1 aaaPending completing an aaa transaction
2 authenticated 802.11 authentication completed
3 associated 802.11 association completed
4 powersave client in powersave mode
5 disassociated 802.11 disassociation completed
6 tobedeleted to be deleted after disassociation
7 probing client not associated or authorized yet
8 disabled automatically disabled by the Operating
System for an operator-defined time