User guide

7-9
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 7 Management Menu Bar Selection
SNMP Trap Receiver
SNMP Trap Receiver > Edit
Use MANAGEMENT > SNMP/Trap Receivers then click Edit to navigate to this page.
You can use this page to Enable or Disable sending traps to a particular server. Only the Status field can
be modified.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.