User guide

6-27
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 6 Security Menu Bar Selection
Network Access Control
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.
Network Access Control > Edit
Use SECURITY > Network Access Control, then click Edit to navigate to this page.
This page allows you to edit the shared secret and admin status of a network access control. This page
contains the following parameters:
• Server Index (Priority) - Index of the RADIUS server. The controller tries Index 1 first, then Index
2 through 4, in descending order. Set to 1 if your network is using only one Authentication server.
• Server IP Address - IP address of the Network Access Control.
• Shared Secret/Confirm Shared Secret - Network Access Control login Shared Secret.
• Port Number - Communication port number for the interface protocols.
Note DO NOT assign the Port Number to one used by another application. Use the default (1812) or any other
port unused by any other application.
• Admin Status - Set the interface to Enabled or Disabled.
Command Buttons
• Back: Return to the previous window.
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.