User guide

6-25
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 6 Security Menu Bar Selection
Access Control Lists
Protocol (Note 1) Protocol to use for this ACL:
Any - All protocols
TCP - Transmission Control Protocol
UDP - User Datagram Protocol
ICMP - Internet Control Message Protocol
ESP - IP Encapsulating Security Payload
AH - Authentication Header
GRE - Generic Routing Encapsulation
IP - Internet Protocol
Eth Over IP - Ethernet over Internet Protocol
OSPF - Open Shortest Path First
Other - Any other IANA protocol (http://www.iana.org/)
DSCP Any or Specific (from 0 - 63). Differentiated Services Code Point
(DSCP). A packet header code that can be used to define quality of
service across the Internet.
Direction Any, Inbound (from client) or Outbound (to client).
Action (Note 2) Deny or Permit.
Note When you select some of these protocols, one or more additional data entry fields open up. Enter
the port number in a single data entry field, or enter the source and destination port when there
are two data entry fields.
Note The default filter is to deny all access unless a rule explicitly permits it.
Table 6-4 New Rule parameters
Parameter Description