User guide

6-8

Cisco WLAN Controller Web Interface User Guide

OL-7416-04

Chapter 6 Security Menu Bar Selection

RADIUS Accounting Servers

Use SECURITY > AAA > RADIUS Accounting to navigate to this page.

This page displays RADIUS information for your existing Remote Accounting Dial-In User Server(s).

• Network User - Enable or disable network user authentication. If this option is enabled, this entry is

considered as the RADIUS authenticating server for the network user.

• Server Index - The RADIUS server Index. The controller tries Index 1 first, then Index 2 through

17, in an ascending order. Set the server index to 1 if your network is using only one accounting

server.

Note You can configure a maximum of 17 RADIUS accounting server entries for a single WLAN.

• Server Address - IP address of the RADIUS server.

• Port - Controller port number for the interface protocols.

• IP Sec - Read only field. Displays the status of the IP Security mechanism. If this option is enabled,

the IP Security Parameters fields will also be displayed.

• Admin Status - Whether the RADIUS Accounting server is enabled or disabled.

• The Edit link opens the RADIUS Accounting Servers > Edit page.

• The Remove link allows you to delete an existing RADIUS Accounting server.

• Click the Ping link to send ping packets to the RADIUS Server to verify that you have a working

connection between the controller and the RADIUS Server

Command Buttons

• New: Select to add a new RADIUS Accounting server (RADIUS Accounting Servers > New).

• Help: Request that the help page be displayed in a new browser window.